There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

Ultrasonic peening treatment (UPT) as a method of severe plastic deformation was used to treat cruciform welded joints of Q345 steel. The application of UPT achieves material surface nanocrystallization of the peening zone, reduces stress concentration, and produces residual compressive stresses at the welded toe. Micro-structure, hardness, stress relief, S-N curve, and the fatigue fracture mec...

background: one of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. this study evaluated the effect of electric spot welding on the load defl ection rate of stainless steel and chromium-cobalt orthodontic wires. materials and methods: in this experimental-laboratory study, load defl ection rate of 0.016 ×...

V. Lazić, D. Arsić, S. Aleksandrović, A. Ilić, L. Ivanović, M. Djordjević, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia A. Sedmak, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia This paper presents the analysis of the influence of temperature on mechanic properties of the base material and welded joints made of high strength steel. The joints...

dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. in this study, x53crmnnin219 (austenitic stainless steel) and x45crsi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. the welded joint was then heat treated at 760 0c for 60 min. mechanical prop...

The reliability of welded structure can be evaluated through welding residual stress analysis and fatigue strength assessment. In this study, welding residual stresses of multi-pass dissimilar material welded joint between alloy 617 and 12Cr steel were analyzed numerically and experimentally. Fatigue strength was then assessed in the air. Based on results of welding residual stress analysis and...

I. Samardžić, Faculty of Mechanical Engineering Slavonski Brod, Croatia, A. Ćorić, Bratstvo, Novi Travnik, Bosnia and Herzegovina, M. Dunđer, Department for Polytechnic, University of Rijeka, Croatia. This paper presents the results of weldability investigation on welded joints made of fine grained high-strength S1100QL steel. The investigations are performed on two welded plates by HV 10 hardn...

The most effective method to reduce CO2 gas emission from the steam power plant is to improve its performance by elevating the steam temperature to more than 700 ◦C. For this, it is necessary to develop applicable materials at high temperatures. Ni-based Alloy 617 and 12Cr steel are used in steam power plants, due to their remarkable mechanical properties, high corrosion resistance, and creep s...

1.1 Offshore Structures: Offshore structures used for oil and gas extraction have the common function of providing a safe, dry working environment for the equipment and persons those operates the platform. Jacket supported drilling equipment as a guide for the piled foundations. The substructure referred to as the jacket is a three dimensional space frame made from large tubular steel members. ...

Study on corrosion propensity of welded mild steelbar in soil media around the coastal area of University of Lagos has been carried out using gravimetric method. Six (6) samples each for welded and unwelded mild steels were cut, their initial weights were recorded and buried in two selected soil. The weight losses of these coupons were measured at regular intervals for a period of six months (1...